Assembly Instructions for Single Pedestal Table

Thank You for buying your single pedestal table from Montana Woodworks. We have put these instructions on our website to save you time and avoid frustration when assembling your table. Our printed instructions are meant to be used as a supplement to the video below. Feel free to print out the instructions here. You will need to have Adobe Reader installed to view the PDF file.

Should you have any questions or need to contact sales or support, please do not hesitate to contact our corporate offices at 888.889.3728 or via E-Mail at: cs@montanawoodworks.com

-----------------------------------------------------

Before beginning assembly please take a few moments to read the instructions carefully, understanding each step. Likewise please also ensure that the hardware package contains the items as described here. Note: a ratcheting wrench can be a considerable timesaver during the assembly process.

This video applies to square,round, or octagon topped pedestal tables.

Tools Needed: 1/2" wrench, Phillips screwdriver

Parts List:

• (1) Pedestal Post
• (4) Wooden Legs
• (4) Top Braces
• (1) Table Top

Hardware List:

• (16) 5/16" Course Thread Nuts
• (16) 5/16" Flat Washers
• (8) 3" Phillips Wood Screws
• (4) Leg Levelers

Steps:
1. Place pedestal post upright on floor.(Hole locations are the same. Either end up works fine!)
2. Attach 4 wooden legs to the post using 5/16" washers and nuts.
3. Screw leg levelers into each leg. Ensure they are completely seated.
4. Carefully turn pedestal post over so that pedestal post is upright with legs resting on floor.
5. Attach the four top braces to the pedestal post using 5/16" washers and nuts, ensuring the braces are as even with the top as possible.
6. Gently place the table top face down on a clean and padded surface being very careful not to scratch or dent it. Turn pedestal assembly over carefully placing it on the table top, aligning top braces with the outline drawn on the underside of table top.
7. Using 3" Phillips head screws, secure the top braces to the table top making certain that the braces are flush against the table top.
8. You are now ready to turn the table upright. With the assistance of another person, turn the table over. You may want to place a clean, padded surface under the table edge to protect it from damage.
9. Adjust the four leg levelers on legs so that the table is level and does not wobble.

PROUDLY MADE IN THE U.S.A.

 *Pine requires a good sealant. We recommend tow coats of varnish being applied per manufacturer's directions. The table may be stained prior to the application of the varnish.